GELEE? GELEE HYDRAULICS /fGL591 低溫鋼絲纏繞液壓橡膠軟管 IPER LOW TEMPERATURE RESISTANT WIRE 'IRAL HYDRAULIC RUBBER HOSE 途: 用于超低溫下使用的石油基液壓油，溫度使用范 -55^-100^ 性: 管由耐超低溫性特好的，具有良好耐油性的特種 合橡膠內膠，鋼絲編織增強層，耐超低溫性特好 且具有良好耐天候性的特種復合橡膠外膠組成。 PLICATIONS: For delivery of petroleum base draulic oil within a temperature range of 一55匕一 OX} ATURE: This hose consist of an inner tube made of \i temperature resistant and oil resistant special )ber compound, a wire spiral reinforcement and a se cover made of low temperature resistant and oil distant special rubber compound.

大口徑鋼絲纏繞橡膠軟管 LARGE SIZE WIRE SPIRAL HYDRAULIC RUBBER HOSE 結構： 膠管由內膠層、鋼絲纏繞層和外膠層組成。 特性. 適用于輸送液壓流體如醇、液壓油、燃油、潤滑油、乳 化油。軟管執行美國API, ISO6807標準。工作溫度-40匕~ 100匕(-40°F ~+212°F)。 CONSTRUCTION: This hose shall consist of an inner tube of oil resistant synthetic rubber, multiple 1 spiral plies of steel wire wrapped in alternating directions, and an oil and weather resistant synthetic " rubber cover. FEATURE: This section covers hose for use with alcohols, hydraulic oil, fuel oil, lubrication oil, emulsified liquids, etc. The hose is made in conformity with API standard and ISO 6807

GL589 SAE 100R15 理高脈沖多層鋼絲增強橡膠軟管 WY DUTY HIGH IMPULSE MUTIPLE SPIRAL STEEL WIRE NFORCED HYDRAULIC RUBBER HOSE 于使用石油基液壓油，溫度范圍-40匕 !1匕(-40°F~+250°F)的軟管。 ■. 由一層耐油合成橡膠內膠層，多層交替方 超高強鋼絲纏繞層和一層耐天侯的合成橡 膠層組成 ICATIONS:This section covers hose for use with 9um base hydraulic fluids within a temperature of-40°C-+121°C (-40°F?+250°F) >TRUCTION:This hose shall consist of an inner )f oil resistant synthetic rubber, multiple spiral plies ivy steel wire wrapped in alternating directions, and and weather resistant synthetic rubber cover.

鋼絲纏繞橡膠軟管 WIRE SPIRAL HYDRAULIC RUBBER HOSE 用途： 適用于使用石油基液壓油，溫度范圍-40-C-+100°C (-40°F~+212°F)的軟管。 特性： 軟管由一層氯丁橡膠內膠層、4層高強度鋼 絲纏繞層和一層耐油、耐天候合成橡膠外膠層組 成。軟管執行EN856-4SH標準.GB/T10544-2003標準。 APPLICATIONS:This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C ?+100°C (-40°F~+212°F). FEATURE: This hose shall consist of a CR inner tube of oil resistant synthetic rubber, four plies of steel wire wrapped in alternating directions and an oil and weather resista nt synthetic rubber cover. The hose is made in conformity with EN856-4SH. and GB/T10544-2013.

GL691 氐溫鋼絲編織液壓橡膠軟管 ER LOW TEMPERATURE RESISTANT WIRE BRAID [RAULIC RUBBER HOSE 于超低溫下使用的石油基液壓油，溫度使用范 齪-100匕 由耐超低溫性特好的，具有良好耐油性的特種 橡膠內膠，鋼絲編織增強層，耐超低溫性特好 具有良好耐天候性的特種復合橡膠外膠組成。 .ICATIONS: For delivery of petroleum base tulic oil within a temperature range of -55t；-1 OOt； URE: This hose consist of an innertube made of jmperature resistant and oil resistant special )r compound, a wire braid reinforcement and a cover made of low temperature resistant and oil tant special rubber compound.

GL689 SAE 100R19 緊湊型28Mpa最大工作壓力4和2層鋼絲增強橡膠軟管 COMPACT ONE/TWO WIRE BRAIDS REINFORCED HYDRAULIC RUBBER HOSE(MAX. WORKING PRESSURE: 28MPA) 結構： 軟管由一層耐油合成橡膠內膠層、按軟管設計1或 2層編織層)的鋼絲增強和一層耐油和耐天候的合成 橡膠外膠層組成。 應用： 適用于使用石油基液壓油，溫度范圍為-40°C~ +100°C(-40°F~+212°F)的軟管。 CONSTRUCTION： This hose shall consist of " inner tube of oil resistant synthetic rubber, a steel wire braid reinforcement (one or two braids, according to hose desig n), and an oil and weather resista nt synthetic rubber cover A ply or braid of suitable material may be used over the inner tube and / or over the wire reinforcement to anchor the synthetic rubber onto the wire. APPLICATIONS： This section covers hose for use with petroleum base hydraulic fluids within a temperature range of-40°C ?+100°C(-40°F~+212°F).

GL688 SAE 100R17 奏型21 Mpm最大工作壓力1和2層鋼絲增強橡膠軟管 MPACT ONE/TWO WIRE BRAIDS REINFORCED HYDRAULIC BBER HOSE(MAX. WORKING PRESSURE: 21 MPA) 當構： l管由一層耐油合成橡膠內膠層、按軟管設計1或 曇編織層)的鋼絲增強和一層耐油和耐天候的合成 2膠外膠層組成。 Z用： i用于使用石油基液壓油，溫度范圍為-40°C~ 1 oo°c (-40°F ~+212°F)的軟管。 ISTRUCTION： This hose shall consist of an inner > of oil resistant synthetic rubber steel wire braid forcement according to hose design(one or two ds), and an oil and weather resistant synthetic )er cover A ply or braid of suitable material may used over the inner tube and / or over the wire forcement to anchor the synthetic rubber to the a LICATIONS： This section covers hose for use with oleum base hydraulic fluids within a temperature je of-40°C ~ + 100°C(-40°F?+212°F).

GL687 SAE 100R16 緊湊型高壓1和2層鋼絲纏繞增強橡膠軟管 緊; COMPACT HIGH PRESSURE, ONE/TWO STEEL WIRE BRAIDS REINFORCED HYDRAULIC RUBBER HOSE CO RUI 結構： 軟管由一層耐油合成橡膠內膠層，按軟管設計(1或 2層編織)的鋼絲増強層和一層耐天候合成橡膠外膠 層組成。 應用： 適用于使用石油基液壓油，溫度范圍一409?+1219 (-40°F ?+250°F)軟管。 2J CONSTRUCTION： This hose shall consist of an inner tube of oil resistant synthetic rubber, one or two steel wire braids reinforcement, and an oil and weather resista nt synthetic rubber cover, a ply or braid of suitable material may be used over the inner tube and / or over the wire reinforcement to anchor the synthetic rubber to the wire. APPLICATIONS： This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -4(Tc ?+121?c(-40°F ?+250°F).

GL881高壓污水清洗噴射軟管 HIGH PRESSURE SEWER JETTING RUBBER HOSE 用途： 適用于高壓清洗和清洗污水處理系統。 內膠層采用特殊優質橡膠，和兩層織物編織，夕卜膠層采用耐磨，耐油和耐氣候的特殊合成橡膠 制成 Applications:For high pressure water cleaning and rinsing of sewage systems. Feature: The inner tube is made of excellent abrasion, oil and weather resistant special synthetic rubber with high tensile synthetic textile braided reinforcement.

汽車空調管系列（四層管、五層管） AUTOMOTIVE A/C HOSE SERIES 用途： 適用于輸送冷媒R134a的各型號汽車空調用橡膠管 特性： 采用耐天候良好的特種橡膠制造，并采用耐超低冷 媒滲透性能和低濕滲透性能的尼龍阻隔材料作為隔 離層，外觀為黑色光面橡膠管。執行QC/T664-2000 標準，不僅僅滿足國內外各大汽車制造廠商的標準要 求，而且更能體現著利通公司對改善人類生存環境的 關注和不懈努力 APPLICATIONS: Rubber tubes for various types of automobile air conditioner suitable for conveying refrigerant R134a FEATURE:This hose is made of special weather resistant rubber compound, Isolation layer is made of nylon barrier material resistant to low refrigerant permeation and low moisture permeability. Hose surface is black smooth. Hose quality subject to QC/T 664-2000 standard, not only meeting the standard requirement of big domestic and foreign automobile manufacturers, but also to embody Letone's attention and unremitting efforts to improve the living environment of mankind.

ND BLASTLNG HOSE 對金屬體表面風壓噴砂除銹用。 生： i層采用耐磨性能優良的橡膠制造，耐壓性能好。 DAFIONS： For sand blasting and eliminating rust on ?face of metal body. RE： The inner tube is made of excellent abrasion nt rubber with good pressure resistance.

用途: 適用于輸送礦物質油，合成脂基油，乳化油和水的低壓 回油管。 特性： 軟管由一層耐油合成橡膠的內膠層，1-2層抗拉纖維編織 增強層和一層耐油耐天侯的合成橡膠外膠層組成。

膠管總成

膠管接頭

美制SAE螺紋O形圈 密封 SAE O-RING MALE H F 11 美制錐螺紋 NPT MALE 16011-RW P95 fa: p 15611-RW P96 英管螺紋球面密封 BSP FEMALE MULTISEAL eSzzp 22111-RW P97 22141-RW P98 22191-RW P99 美制JIC螺紋74。錐 密封 JIC 74° CONE —nztimmi — 16711-RW P100 26711-RW P101 26741-RW P102 佶 26791- RW P103 26711D-RW P104 徒 26711D-SMRV P104 f3 1 26791K-RW P105 美制SAE螺紋90。錐 密封 SAE 90° CONE SEAT 喚卩 17811-RW P105 27811-RW P105 27841-RW P106 嚴 27891-RW P106 美制ORFS螺紋平而 密封 ORFS FLAT SEAT ^TTTl. ba P 14211-RW P106 亦一p 24211-RW P107 嚴 24241-RW P108 24291-RW P109 美制NPSM螺紋60。 錐面密封 NPSM FEMALE 60° CONE SEAT 21611-RW P110 21641-RW P110 產 21691-RW P111 SAE 法蘭式3000PSI 輕系列 SAE FLANGE L.T. 87311-RW P111 87341-RW P112 87391-RW P112 SAE 法蘭式6000PSI 重系列 SAE FLANGE S.T. 已 87611-RW P113 87641-RW P113 產 87691-RW P114 日制法蘭 JIS FLANGE 88111-RW P115 88141-RW P115 產 88191-RW P115 日式公制螺紋60。錐 密封 JIS METRIC 60° CONE SEAT 啦i—p 18611-RW P116 28611-RW P116 28641-RW P117 F 28691-RW P117 日式英管螺紋60。錐 密封 JIS BSPP 60° CONE SEAT 29611-RW P118 29641-RW P119 F 29691-RW P119

扣壓設備